DOMNICK HUNTER FILTER ELEMENT ZHFT/2C

HIGH FLOW TETPOR II is validated as a 0.2 micron sterilizing grade filter in liquids through ASTM F838-05 and in gas through full retention to an aerosol challenge of MS2 phage. This ensures the filter will guarantee the sterility of your process in the worst-case scenario where the filter may be subjected to bulk liquid due to a process problem.

Subtle changes to the structure of the hydrophobic PTFE have also resulted in the production of an extremely robust product, now validated for 225 steam sterilization cycles. The combination of non-woven supports upstream of the membrane and an expanded net layer downstream provides increased protection and service life while guaranteeing zero fibre shedding into the process.

HIGH FLOW TETPOR II is suitable for all sterile gas applications including fermentation inlet and off-gas streams, venting, lyophilisers, autoclave vacuum breaks and blow-fill-seal equipment as well as the provision of particle-free air within the electronics industry.

Features and Benefits:

• Steam sterilizable up to 225 cycles at 142°C (287.6°F)
• Unrivalled flow rates combined with low pressure drops
• Fully validated to ASTM 838-05 for liquid bacterial challenge
• Fully validated to aerosol and viral challenge
• Integrity testable by all methods including water intrusion test

Toepassing: Steriele gas- en ontluchtingsfiltratie
Merk: Parker
Divisie: Bioscience and Water Filtration Division
Eindkapconfiguratie: P-7
Filterconstructie: Geplooid
Filtermateriaal: PTFE
Voor vloeistoftype: Lucht en gas
Industrie: Voeding en dranken
Farmaceutica
Lengte: 20" (500 mm)
Constructiematerialen: Filtratiemedium: PTFE
Stroomopwaartse ondersteuning: Polypropyleen
Stroomafwaartse ondersteuning: Polypropyleen
Binnenste steunkern: 316L roestvrij staal
Buitenste beschermkooi: Polypropyleen
Eindkappen: Polypropyleen
Eindkapinzetstuk: Polysulfon
Standa
Micronclassificatie: 0,2 micron in vloeistof, 0,01 micron in gas
Bedrijfstemperatuur: 60,0 °C maximale inlaatluchttemperatuur, 140,0 °F maximale inlaatluchttemperatuur
Drukverschil: 3,5 barg bij 60 °C (140 °F) maximale drukverschil buiten-binnen, 50,76 psig bij 60 °C (140 °F) maximale drukverschil buiten-binnen.
Productserie: HIGH FLOW TETPOR II
Producttype: Cartridge
Producttype: Luchtfilterelement
Afdichtingsmateriaal: Siliconen
Specificaties: Volledig gevalideerd volgens ASTM F838-05 vloeibare bacteriële test
Volledig gevalideerd volgens aerosol- en virale test
FDA 21 CFR deel 177
USP Plastics Klasse VI - 121 °C
Gevalideerd door aerosol bacteriële en MS-2 Coliphage-test
Technologie: Filtratie